Category
- ALL
- Screws
- Timer/ Deck screw
- Reduce Point Self-drilling Screws
- Hex Head Self-drilling Screws(Tek Screws)
- Countersunk/Flat/Pan head Self-drilling Screw
- Milling Point Self-drilling Screws
- Concrete Screws
- Zn-Al Capped Self-drilling Screws
- Stainless(ss 304) Capped Self-drilling Screws
- Wood/Chipboard Screw
- No5 Point Self-drilling Screws
- Type 17 Screws
- Head Painted Roofing Screws
- Drywall Screws
- Bolts and STUD
- Nuts
- Stamping
- CNC Turning
Custom Stamped Steel Mounting Plates & Flanges – Precision OEM Metal Components
-
Custom Stamped Steel Flanges & Mounting Plates Manufacturer
Precision Steel Stamping Components for Automotive and Industrial OEM Applications
SANN MUO is a Taiwan-based supplier of custom stamped metal parts, steel mounting plates, and precision steel flange components for automotive, industrial machinery, and OEM applications.
Our featured custom steel mounting plate incorporates a flat steel body, two differently sized U-shaped edge cutouts, and a centrally positioned mounting hole.
Unlike conventional circular pipe flanges or threaded fasteners, this component uses a specially designed plate profile to meet customer-specific assembly and mounting requirements.
The product highlights the importance of precision profile manufacturing, controlled hole positioning, material selection, geometric accuracy, and corrosion-resistant finishing.
SANN MUO supports manufacturing inquiries based on customer engineering drawings, approved samples, material specifications, surface treatments, and inspection requirements.
What Is a Custom Stamped Steel Flange?
A custom stamped steel flange or mounting plate is a metal component manufactured with a specific external profile, opening configuration, and mounting features.
Unlike a standardized fastener, its geometry is designed around the mating parts and installation requirements of a particular mechanical assembly.
The featured SANN MUO product has a flat plate-like body with opposed U-shaped cutouts and a central circular opening.
Its form differs from a conventional pipe flange, which typically uses a circular body and a pattern of fastening holes.
Key Product Features
- Custom flat steel plate construction
- Two differently sized U-shaped edge cutouts
- Central circular mounting hole
- Drawing-defined external profile
- Customer-specified plate thickness
- Cold-rolled steel material requirements
- Controlled hole and cutout positioning
- Edge finishing and burr control
- Corrosion-protection coating requirements
- OEM manufacturing based on approved engineering drawings
The complete dimensions, mechanical function, and installation requirements are defined by the customer's approved product specification.
Custom H-Shaped Steel Plate and Mounting Geometry
The distinctive geometry of the featured component is one of its most important characteristics.
The opposed edge cutouts create an H-like mounting profile with different opening dimensions.
Opposed U-Shaped Cutouts
The plate incorporates two U-shaped cutouts located on opposite sides.
Their widths, depths, and curved profiles are defined by the engineering drawing.
These features may provide clearance, positioning, or contact interfaces within a compatible mechanical assembly.
The actual function depends on the mating components.
Central Mounting Hole
The central circular opening provides a defined interface for an appropriate mating component.
Important characteristics may include:
- Hole diameter
- Hole position
- Edge distance
- Hole-to-cutout relationship
- Hole perpendicularity
- Surface and edge condition
The opening is not identified as an internally threaded feature.
Flat Plate Body
The flat body provides a defined thickness and overall mounting geometry.
Depending on the application, plate flatness and thickness consistency can influence the fit between mating parts.
Rounded Cutout Profiles
The curved cutout profiles require controlled geometry.
Their dimensions can affect clearance and contact with corresponding components.
Edge Geometry
Stamped or blanked steel plates may require specific edge and burr requirements.
For applications with close-fitting components, the finished edge condition should be included in the inspection specification.
Custom Steel Flange and Mounting Plate Specifications
SANN MUO supports drawing-based production inquiries for steel mounting plates and special flange-shaped components.
Specification Product Description / Engineering Requirement Product Type Custom Steel Mounting Plate / Steel Flange Product Category Precision Metal Stamping Components Featured Geometry Flat Plate with Opposed U-Shaped Cutouts Mounting Feature Central Circular Hole External Profile Customer-Specified Material Cold-Rolled Steel According to Approved Specification Material Thickness Drawing-Defined Hole Diameter and Position Customer-Specified Cutout Geometry According to Engineering Drawing Geometric Tolerances Approved Product Requirements Surface Treatment Zinc-Based Corrosion Protection Where Specified Edge Condition Customer-Specified Burr and Edge Requirements Production Method Selected According to Geometry, Material and Tolerances Inspection Customer-Defined Critical Characteristics Custom Manufacturing Engineering Drawings and Approved Samples This table describes the featured design and manufacturing requirements. It is not a universal dimensional catalog. Final specifications must be confirmed from the approved engineering drawing.
Precision Metal Stamping and Blanking Requirements
Manufacturing a custom steel mounting plate involves more than cutting a shape from metal.
The finished component must satisfy the required profile, hole location, material condition, and geometric tolerances.
Depending on the plate thickness, production quantity, and dimensional requirements, different manufacturing methods may be considered.
Material Preparation
The selected steel must meet the specified material grade, thickness, and delivery condition.
Material properties can influence forming behavior, edge quality, and manufacturing feasibility.
Profile Blanking
Blanking is a manufacturing method used to separate a defined component profile from sheet or strip material.
For suitable part designs, a blanking process can produce the required external shape and internal openings.
Hole Piercing
The central mounting hole can be produced using an appropriate hole-forming or material-removal process.
The selected method must satisfy the specified hole dimensions and positional requirements.
Cutout Formation
The differently sized U-shaped cutouts require control of the curved and straight profile sections.
Their geometry must correspond to the intended assembly.
Edge Finishing
Depending on the cutting process, the finished plate may require deburring or other edge-finishing operations.
Dimensional Verification
The final component must meet the approved dimensions and geometric requirements.
Alternative Manufacturing Processes
Depending on the material thickness, tolerances, tooling investment, and production quantity, alternative processes such as precision cutting or additional machining may be evaluated.
The appropriate manufacturing process should be selected through an engineering and production feasibility review rather than assumed from the component's appearance alone.
Why Profile and Hole Position Accuracy Matter
For custom steel mounting plates, the relative position of the hole and external cutouts can be as important as the individual dimensions.
Hole Position
The mounting hole must align with the intended mating component.
Incorrect positioning can create assembly interference.
Cutout Alignment
The U-shaped cutouts must be located correctly relative to the rest of the plate.
Profile Symmetry
Where specified, symmetry can be an important characteristic of the external shape.
Plate Flatness
The required flatness influences how the plate fits against a mating surface.
Thickness Consistency
Plate thickness must satisfy the drawing and material specifications.
Burr and Edge Condition
Excessive burrs or unacceptable edge conditions may affect assembly clearance or handling.
Geometric Tolerances
Applicable geometric controls should be defined using the engineering drawing and relevant tolerance standards.
Cold-Rolled Steel for Custom Mounting Plates
The featured engineering design specifies a cold-rolled steel material with defined delivery-condition requirements.
Cold-rolled steel strip and related flat products can be selected for mechanical components requiring consistent material characteristics and controlled dimensions.
Material Selection Considerations
Mechanical Properties
The required strength and other material characteristics should follow the applicable material standard.
Material Thickness
Thickness influences the component geometry and the feasibility of different cutting or stamping processes.
Dimensional Stability
Material condition and manufacturing processes should be suitable for the specified finished dimensions.
Surface Condition
The material surface may affect subsequent finishing and coating processes.
Manufacturing Compatibility
The selected steel must be compatible with the intended production method.
Material Reference
For applicable cold-rolled low-carbon steel narrow strip, EN 10139 provides material and delivery-condition classifications.
The relevant material condition must be selected according to the approved engineering specification.
SANN MUO also lists other steel materials for its broader stamped-component product range. However, alternate material grades should not be substituted for the specified material without technical approval.
Zinc Coating and Corrosion Protection for Steel Stampings
Custom steel mounting plates may require protective surface treatment according to their operating environment and customer specifications.
For the featured design, the engineering requirements include a zinc-based corrosion-protection finish.
Electroplated Zinc
Electroplated zinc can provide sacrificial corrosion protection for suitable steel components.
The required coating thickness and finish must be specified by the customer.
Chromate Passivation
A specified passivation treatment can be applied as part of a zinc electroplating system.
The exact treatment, color, chemical restrictions, and regulatory requirements must follow the approved finish specification.
Coating Thickness
Coating thickness is an important factor in meeting the required corrosion-protection specification.
It may also affect critical dimensions and contact surfaces.
Edge and Cutout Coverage
For a specially shaped steel plate, coating coverage around the hole, cutouts, and edges may require particular attention.
Corrosion Testing
The customer may specify neutral salt spray or other corrosion evaluation requirements.
Corrosion testing should follow the applicable test method and agreed acceptance criteria.
Available Coating Alternatives
For other custom stamping projects, SANN MUO's published coating options include GEOMET, DACROMET, MAGNI®, zinc-nickel plating, and black oxide.
These are general product-range options and are not automatically interchangeable with the finish specified for the featured mounting plate.
Steel Mounting Plate vs. U-Nut vs. Conventional Flange
Although these components may be grouped within metal stamping or fastening product catalogs, their structures and installation functions differ.
Feature Custom Steel Mounting Plate U-Nut / Clip Nut Conventional Pipe Flange Primary Form Flat Profiled Plate U-Shaped Clip Generally Circular Flange Internal Thread Not Shown on Featured Design Typically Present Design-Dependent Main Geometry Custom Cutouts and Mounting Hole Spring Clip and Threaded Feature Pipe or Connection Interface Main Selection Factor Profile, Hole Position and Material Panel Thickness and Thread Connection Design and Rating Manufacturing Requirements Profile Cutting, Hole Accuracy, Finishing Clip Forming and Threading According to Flange Design Installation Method Assembly-Specific Clips onto Compatible Panel According to Piping or Equipment Design Specification Basis Customer Engineering Drawing Product Standard or Drawing Applicable Flange Standard The featured mounting plate should not be classified as a pressure-rated pipe flange or a threaded clip nut.
Its actual function is determined by the approved mechanical assembly.
Custom Steel Stamping Components for Automotive Applications
Automotive and vehicle component manufacturers often require specially shaped metal parts with defined dimensions, material characteristics, and surface finishes.
Custom mounting plates can be considered where standardized brackets or flat washers do not meet an assembly's geometric requirements.
Automotive Component Mounting
Certain vehicle assemblies may require customized steel mounting interfaces.
Mechanical Positioning Components
Specially profiled plates may be designed for applications involving defined component positioning or assembly clearance.
Equipment Connection Plates
Industrial equipment may use custom plate components to connect or position mating parts.
OEM Mechanical Assemblies
OEM customers may require drawing-based steel components manufactured around proprietary assembly dimensions.
Replacement Components
Existing equipment may require special metal plates whose profiles are not available in standard catalogs.
These are potential application categories. Suitability for a specific vehicle or other critical application must be verified according to the relevant engineering and quality requirements.
Custom Stamped Steel Flanges Based on Engineering Drawings
SANN MUO supports OEM inquiries involving specially shaped steel mounting plates and stamping components.
Customers can provide:
- Engineering drawings or approved samples
- Required material grade
- Material thickness
- External plate dimensions
- Hole diameter and position
- U-shaped cutout geometry
- Edge and burr requirements
- Flatness and geometric tolerances
- Surface treatment specifications
- Corrosion-protection requirements
- Inspection and testing criteria
- Estimated production quantity
Engineering drawings should identify the final approved revision before production.
Where a drawing contains marked-up revisions or proposed modifications, the final geometry and acceptance requirements should be confirmed before tooling and manufacturing.
Quality Inspection for Precision Steel Stamping Parts
Quality requirements for a custom steel mounting plate should focus on characteristics that influence fit, assembly, and product conformity.
External Profile Inspection
The overall dimensions and specially shaped edges should meet the approved drawing.
Mounting Hole Verification
The hole diameter and position should be checked against the specified tolerances.
Cutout Geometry
The curved profiles and locations of the U-shaped openings may require dimensional inspection.
Plate Thickness and Flatness
The finished plate should meet its specified thickness and geometric requirements.
Edge Quality
Burrs, sharp edges, and other specified edge characteristics should be evaluated according to the drawing.
Material Verification
The material grade and required material condition must meet the approved specifications.
Coating Inspection
Coating thickness, appearance, and applicable corrosion requirements should follow the agreed finishing specification.
Revision Control
For customer-designed parts, the applicable drawing revision is important to maintaining the correct product configuration.
Inspection procedures, sampling plans, test methods, and acceptance criteria are established according to the approved customer requirements.
Frequently Asked Questions About Custom Steel Mounting Plates
Q. What is a custom stamped steel flange?
It is a steel component with a specified flange-like or mounting-plate geometry produced according to an engineering design.
Q. Is the featured Steel Flange a standard pipe flange?
No. The featured design is a flat steel mounting plate with special cutouts and a central hole. It is not identified as a conventional pressure-rated pipe flange.
Q. What makes this custom steel plate different?
Its geometry includes two differently sized U-shaped edge cutouts and a centrally positioned mounting hole.
Q. What is the purpose of the U-shaped cutouts?
Their actual function depends on the mating assembly. They may provide clearance, positioning, or another defined mechanical interface.
Q. Does the component have internal threads?
The featured engineering drawing shows a central circular hole rather than a specified internally threaded feature.
Q. Can the cutout dimensions be customized?
Customers can submit drawings specifying the required opening profiles, dimensions, and tolerances for manufacturing evaluation.
Q. Can SANN MUO manufacture different plate thicknesses?
SANN MUO supports custom stamping inquiries involving customer-specified thicknesses, subject to material and manufacturing feasibility.
Q. What materials can be used?
The featured design specifies cold-rolled steel. Alternative material requirements can be submitted for technical review.
Q. Does the mounting plate require heat treatment?
Heat treatment should only be specified where required by the applicable material or product specification. It is not assumed for every custom steel plate.
Q. Can these plates be zinc plated?
Yes. Zinc-based corrosion-protection requirements can be specified for compatible steel components.
Q. What is the purpose of chromate passivation?
Passivation is used as part of selected zinc-plating systems to support the specified protective finish.
Q. Can SANN MUO provide salt spray testing?
Customers can specify corrosion-test requirements for technical and production evaluation. The applicable method and acceptance criteria must be agreed upon.
Q. Is a steel mounting plate the same as a U-nut?
No. A U-nut combines a spring clip with an internal thread, while the featured mounting plate has a flat profile with cutouts and a mounting hole.
Q. Can these components be used in automotive assemblies?
Custom steel plates may be used in vehicle-related assemblies when their material, dimensions, finish, and performance satisfy the relevant requirements.
Q. Can SANN MUO manufacture custom steel stamping parts from drawings?
SANN MUO supports drawing-based manufacturing inquiries for custom steel mounting plates, flanges, and related metal components.
Q. What information is needed for a quotation?
Please provide the final approved drawing, material specification, thickness, critical dimensions, surface treatment, inspection requirements, and estimated order quantity.
Request a Quote for Custom Steel Flanges and Mounting Plates
Looking for a custom stamped steel flange or mounting plate supplier in Taiwan?
SANN MUO supports drawing-based manufacturing for specialized steel components requiring accurate external profiles, mounting holes, controlled material characteristics, and customer-specified surface finishes.
Our featured Steel Flange demonstrates the dimensional and finishing requirements involved in producing nonstandard OEM metal components.
Whether your project involves a custom H-shaped mounting plate, a precision blanked steel component, or a specialized metal flange, SANN MUO can evaluate your engineering specifications.
Send your final approved drawings, material requirements, coating specifications, and estimated production quantity to request a quotation.
Contact SANN MUO for Custom Steel Mounting Plates, Precision Metal Stampings and OEM Steel Components.
-
According to customer's drawing and samples.
Material: Carbon steel, 35ACR, S50C
Size: M4 – M12
Coating: Geomet, Dacromet, Magani, Zn-Ni, Black oxidizes